The FlexPwr Brick™ is designed to function properly with an input power of 10-28VAC (ungrounded) or 12-32V DC (grounded or ungrounded). A 2-pin header (Phoenix Contact #1881448)style connector is used for the power input. The 12VAC, 600mA wall transformer provided with the product provides a floating power source that has been designed to eliminate any ground loops through the power supply connection.
Please contact VAC for
- Unbalanced mono audio distribution amplifier
- Loop-thru input
- Individual variable gain
- Terminal block connectors
|Input 1 Signal Type||Unbalanced Audio|
|Input 1 Coupling||DC|
|Input Configuration 1||Standard 10K Ohms|
|Input 1 Connector||2 pin Terminal Block|
|Output 1 Signal Format||Unbalanced Audio|
|Output 1 Coupling||DC|
|Output Configuration1||Standard 10K Ohms|
|Output 1 Connectors||2 pin Terminal Block|
|Power Connector||2 Pin 2.5mm TB|
|Input Voltage 1||10-28 VAC|
|Input Voltage 2||12-32 VDC|
|Low Operating Temp (C)||-40|
|High Operating Temp (C)||80|
|Mounting||Two 6-32 Inserts|
This unit has a non-isolated internal switcher power supply (FlexPWR). The unit will operate correctly on 10-28 VAC or 10-32 VDC. The power input is protected so power can be applied in either polarity. The supply provides the internal electronics with power with the ground of the video circuits being the same as the input power ground. The power connector is a 2-pin 2.5mm terminal block with detent retention that can support high vibration environments.
The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.