The 16-071-704 is a 1X4 unbalanced audio distribution amplifier packaged in a small epoxy block without connectors. This VAC Mini Function Block product is intended to be designed into a users product and hard wired into the system.
The product provides 6-32 threaded mounting holes so the user can mount the Mini Function Block. The dimensions of the Mini Function Block are designed so the product can be mounted to a PC card and slide into standard PC card racks.
Please contact VAC for
The 16-071-704 does not ship with any type of power supply. It is left to the user to provide correct power.
|Input 1 Signal Type||Unbalanced Audio|
|Input 1 Coupling||DC|
|Input Configuration 1||Standard 10K Ohms|
|Input 1 Connector||PCB pads|
|Output 1 Signal Format||Unbalanced Audio|
|Output 1 Coupling||DC|
|Output Configuration1||50 Ohms|
|Output 1 Connectors||PCB pads|
|Power Connector||PCB pads|
|Input Voltage 2||8-32 VDC|
|Low Operating Temp (C)||-40|
|High Operating Temp (C)||80|
|Mounting||Two 6-32 Inserts|
This unit has a very basic linear power supply with a 12 VAC input voltage requirement. A 12 VAC wall transformer (120 VAC input) is supplied with each unit. By using the wall transformer the power system provides ground isolation between the input power and the video circuits. The power supply uses a half wave rectifier design to develop the internal positive and negative voltage rails for the active operational amplifiers.
The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.