Filter

1×4 Composite Video Distribution Amplifiers – Loop-thru Input

11-131-104   Unity Gain, BNC Connectors, 12VAC w/P5 Connector
11-131-204   Unity Gain, RCA Connectors, 12VAC w/P5 Connector
11-133-104   Global Variable Gain, BNC Connectors, 12VAC w/P5 Connector
11-133-204   Global Variable Gain, RCA Connectors, 12VAC w/P5 Connector
11-134-104   Individual Variable Gain, BNC Connectors, 12VAC w/P5 Connector
11-134-204   Individual Variable Gain, RCA Connectors, 12VAC w/P5 Connector
11-531-104   Unity Gain, BNC Connectors, FlexPwr
11-531-204   Unity Gain, RCA Connectors, FlexPwr
11-533-104   Global Variable Gain, BNC Connectors, FlexPwr
11-533-204   Global Variable Gain, RCA Connectors, FlexPwr
11-534-104   Individual Variable Gain, BNC Connectors, FlexPwr
11-534-204   Individual Variable Gain, RCA Connectors, FlexPwr

Overview

Common Application

The common application of this unit is to generate two copies of a single composite video signal so the downstream devices can be driven without degradation of the video quality. Because this is an active device (requires power) signal quality as well as signal levels are maintained while generating the multiple copies of the original signal. The high bandwidth of this unit insures the input video signal is not modified due to bandwidth roll off (DC – 200 MHz bandwidth at -3db level).

Power Supply

This unit has a non-isolated internal switcher power supply (FlexPWR). The unit will operate correctly on 10-28 VAC or 10-32 VDC. The power input is protected so power can be applied in either polarity. The supply provides the internal electronics with power with the ground of the video circuits being the same as the input power ground. The power connector is a 2-pin 2.5mm terminal block with detent retention that can support high vibration environments.

Package

The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.

Description

A one input to four output composite video distribution amplifier with a loop-thru input (10K Ohm termination). The output of the loop-thru input must be terminated with a doenstream devices or a BNC terminator to 75 Ohms. This unit has a single gain pot controls the gain of all four outputs. Unused outputs do not need to be terminated with 75 Ohms. All of the video connections are BNC connectors. This unit is intended to be used with NTSC or PAL video signals.

Highlights

  • Analog video distribution amplifier (DA)
  • NTSC or PAL formats
  • 1 input, 4 output configuration
  • Single gain control for all outputs
  • Loop-thru input (10K Ohms)
  • BNC connectors for video signals
  • FlexPwr power supply (10-28 VAC, 10-32 VDC)
  • 2 pin 2.5mm terminal block power connector

Specifications

Group ProSeries
# Channels 1
Inputs/Channel 1
Outputs/Channel 4
Input 1 Signal Type Composite Video
Input 1 Coupling DC
Input Configuration 1 Differential
Gain Configuration Individual
Input 1 Connector BNC
Output 1 Signal Format Composite Video
Output 1 Coupling DC
Output 1 Connectors BNC
Power Connector 2 Pin 2.5mm TB
Input Voltage 1 10-28 VAC
Input Voltage 2 10-32 VDC
Height .65
Width 4.4
Depth 2.2
Weight Oz TBD
High Operating Temp (C) 80
Power Bypass NO
Mounting Two 6-32 Inserts

Drawings

11-533-104 PDF

 

Manual

11-x3x-x04 Manual