Filter

1×2 RGB Distribution Amplifier

12-111-112 Standard Input, BNC Connectors, 12VAC w/P5 Connector
12-111-212 Standard Input, RCA Connectors, 12VAC w/P5 Connector
12-131-112 Loop-thru Input, BNC Connectors, 12VAC w/P5 Connector
12-131-212 Loop-thru Input, RCA Connectors, 12VAC w/P5 Connector
12-511-112 Standard Input, BNC Connectors, FlexPwr
12-511-212 Standard Input, RCA Connectors, FlexPwr
12-531-112 Loop-thru Input, BNC Connectors, FlexPwr
12-531-212 Loop-thru Input, RCA Connectors, FlexPwr

Overview

Power Supply

The 12VAC Brick™ is designed to function properly with an input power of 11-13VAC.
The Brick will not operate from a DC voltage. A 2.1mm P5 style connector is used for the power input. If
the input voltage is a grounded system, the center pin of the P5 is the power connection and the barrel is the
ground side. All ProSeries units are shipped with a 12VAC, 600mA floating power supply that eliminates any
ground loops through the power supply connection.

The FlexPwr Brick™ is designed to function properly with an input power of 10-28VAC
(ungrounded) or 12-32VDC (grounded or ungrounded). A 2-pin header (Phoenix Contact #1881448) style
connector is used for the power input. The 12VAC, 600mA wall transformer provided with the product provides
a floating power source that has been designed to eliminate any ground loops through the power supply
connection.

Package

The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.

Description

This video distribution amplifier are compact, reliable, and high-quality for broadcast, professional AV, security, military and manufacturing applications.

Highlights

  • True 75 Ohm BNC connectors provide accurate matching to coax cable input and outputs
  • Sophisticated power supply circuitry to eliminate interference from noisy or poorly regulated power sources
  • Exceptionally flat gain characteristics across the entire bandwidth to provide the highest quality signal reproduction
  • Epoxy encapsulated “Brick” is virtually impervious to environmental extremes

Specifications

Group ProSeries
Frequency Response  

DC – 440 MHz @ -3dB, fully loaded over full voltage range

(1Vpp input signal, 0V DC offset)
Input Signal Level 0.1 – 2.0Vpp (within -1V to +1V range from ground)
Input Impedance 75 Ohms
Input Coupling DC
Input Connectors Standard –    BNC or RCA 6 each

Loop Thru – BNC or RCA 6 each
Output Connectors Standard –    BNC or RCA 6 each

Loop Thru – BNC or RCA 6 each
Configuration Standard   –  Standard input,   2 active outputs (per channel)

Loop-Thru – Loop-thru input, 2 active outputs (per channel)
Output Series Impedance 75 Ohms
Package Solid epoxy block
Height 2.2”
Width 4.4”
Depth 2.15”
Power 12 VAC 11 to 13 VAC (grounded or un-grounded
2.1 mm P5 Connector < 525 mA current
Flex Pwr 10-28 VAC (ungrounded) or
12-32 VDC (grounded or un-grounded)
2 pin header (Phoenix # 1881325)

<345mA input current @ 12VDC

<405mA input current @ 10 VAC

(all currents measured with 2Vpp 1kHz sine wave fully loaded
Operating Temp (C) 12 VAC -40C to + 50C

FlexPwr -40C to + 80C
Operating Humitdity 0% to 95%
Shipping Wieght 3 lbs

 

Manual

12-xx1-x12 Manual